<Past |
Future> |
3.06 |
Approved w/Constraints [4, 5, 6] |
Approved w/Constraints [4, 5, 6] |
Approved w/Constraints [4, 5, 6] |
Approved w/Constraints [6, 7, 8] |
Divest [6, 7, 8] |
Divest [6, 7, 8] |
Divest [6, 7, 8] |
Divest [6, 7, 8] |
Divest [6, 7, 8] |
Divest [6, 7, 8] |
Unapproved |
Unapproved |
3.07 |
Unapproved |
Unapproved |
Unapproved |
Unapproved |
Approved w/Constraints [6, 7, 8] |
Approved w/Constraints [6, 7, 8] |
Approved w/Constraints [6, 7, 8] |
Approved w/Constraints [6, 7, 8] |
Approved w/Constraints [6, 7, 8] |
Approved w/Constraints [6, 7, 8] |
Approved w/Constraints [6, 7, 8] |
Approved w/Constraints [6, 7, 8] |
3.08 |
Unapproved |
Unapproved |
Unapproved |
Unapproved |
Unapproved |
Unapproved |
Unapproved |
Unapproved |
Approved w/Constraints [6, 7, 8] |
Approved w/Constraints [6, 7, 8] |
Approved w/Constraints [6, 7, 8] |
Approved w/Constraints [6, 7, 8] |
| | [1] | This Technology is currently being evaluated, reviewed, and tested in controlled environments. Use of this technology is strictly controlled and not available for use within the general population. | | [2] | Veterans Affairs (VA) users must ensure VA sensitive data is protected properly in accordance with VA Handbook 6500 and the Federal Information Security Management Act (FISMA). Per VA Handbook 6500, FIPS 140-2 certified encryption must be used to protect and encrypt data in transit and at rest if Personally Identifiable Information/Protected Health Information/VA (PII/PHI/VA) sensitive information is involved. If FIPS 140-2 certified encryption in not used, additional mitigating controls must be documented in an approved System Security Plan (SSP). In addition, the technology must be implemented within the VA production network (not in a Demilitarized Zone (DMZ)) unless the specific uses and instances of the technology are approved by the Enterprise Security Change Control Board (ESCCB). In these cases, Memorandum of Understanding and Interconnection Security Agreements (MOU/ISA), which detail the security requirements for users and systems that share information and resources outside of the VA production network must be included. | | [3] | As of April 23, 2015, per the Deputy CIO of Architecture, Strategy and Design (ASD), all technologies in use by the VA require an assessment by the VA Section 508 office. Section 508 of the Rehabilitation Act Amendments of 1998 is a federal law that sets the guidelines for technology accessibility. A VA Section 508 assessment of this technology has not been completed at the time of publication. Therefore, as of April 23, 2015 only users of this technology who have deployed the technology to the production environment, or have project design and implementation plans approved, may continue to operate this technology. In the case of a project that has implemented, or been approved for a specific site or number of users, and that project needs to expand operations to other sites or to an increased user base, it may do so as long as the project stays on the existing version of the technology that was approved or implemented as of April 22, 2015. Use of this technology in all other cases is prohibited.
| | [4] | Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISO (Information Security Officer) to ensure compliance with VA Handbook 6500. | | [5] | Per the May 5th, 2015 memorandum from the VA Chief Information Security Officer (CISO) FIPS 140-2 Validate Full Disk Encryption (FOE) for Data at Rest in Database Management Systems (DBMS) and in accordance with Federal requirements and VA policy, database management must use Federal Information Processing Standards (FIPS) 140-2 compliant encryption to protect the confidentiality and integrity of VA information at rest at the application level. If FIPS 140-2 encryption at the application level is not technically possible, FIPS 140-2 compliant full disk encryption (FOE) must be implemented on the hard drive where the DBMS resides. Appropriate access enforcement and physical security control must also be implemented. All instances of deployment using this technology should be reviewed to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards. It is the responsibility of the system owner to work with the local CIO (or designee) and Information Security Officer (ISO) to ensure that a compliant DBMS technology is selected and that if needed, mitigating controls are in place and documented in a System Security Plan (SSP). | | [6] | This product is Class 2 or Class 3 VA-designed and built Local Software OR is a commercially-licensed software product purchased or leased that will run in a VA VISTA environment or integrate with Class 1 National VISTA Software. Presence of this software on the One-VA TRM does not equate to designation as a Class 1 National Software product and MUST NOT be assumed to comply with all VA programming standards, namespacing and interface control agreement standards, data management standards, documentation standards, information assurance standards, security standards and 508 compliance standards. As a Class 2 or Class 3 product, it MUST NOT be assumed to having been released into production through all OI&T product release and sustainment process controls for project management; requirements, development and testing management; and configuration, change, and release management necessary to satisfy OI&T process and product compliance. The OI&T Enterprise Program Management Office does not endorse nor support Class 2 and Class 3 products and does not support data usage or application programmer interfaces (APIs) between Class 1 National Software products and Class 2 or Class 3 products. Class 2 or Class 3 products must restrict their interfaces to Class 1 National Software to use of publicly-supported APIs ONLY. VA Directive 6402, Modifications to Standardized National Software, dictates the policy for Class 2 and Class 3 products and modifications to Class 1 National Software products. Local enhancements to, or modifications of, Class 1 Protected National Software (as listed in the Directive), in part or in whole, is PROHIBITED. Local enhancements to, or modifications of, Non-Protected Class 1 National Software is allowed ONLY with an approved waiver by the Software Modification Waiver Committee (SMWC). Class 2 and Class 3 software that does not modify the Class 1 National Software in any way must still adhere to namespacing and interface control agreement standards as well as National Field Operations Processes. | | [7] | Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISO (Information Security Officer) to ensure compliance with VA Handbook 6500. | | [8] | Per the May 5th, 2015 memorandum from the VA Chief Information Security Officer (CISO) FIPS 140-2 Validate Full Disk Encryption (FOE) for Data at Rest in Database Management Systems (DBMS) and in accordance with Federal requirements and VA policy, database management must use Federal Information Processing Standards (FIPS) 140-2 compliant encryption to protect the confidentiality and integrity of VA information at rest at the application level. If FIPS 140-2 encryption at the application level is not technically possible, FIPS 140-2 compliant full disk encryption (FOE) must be implemented on the hard drive where the DBMS resides. Appropriate access enforcement and physical security control must also be implemented. All instances of deployment using this technology should be reviewed to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards. It is the responsibility of the system owner to work with the local CIO (or designee) and Information Security Officer (ISO) to ensure that a compliant DBMS technology is selected and that if needed, mitigating controls are in place and documented in a System Security Plan (SSP). |
|
Note: |
At the time of writing, version 3.0.8 is the most current version, released 03/15/2018. |