| GetWellNetwork |
Approved w/Constraints
[4, 11, 12, 13, 14] |
Approved w/Constraints
[4, 11, 12, 13, 14] |
Approved w/Constraints
[4, 11, 12, 13, 14] |
Approved w/Constraints
[4, 11, 12, 13, 14] |
Approved w/Constraints
[4, 14, 15, 16, 17] |
Approved w/Constraints
[4, 14, 15, 16, 17] |
Approved w/Constraints
[4, 14, 15, 16, 17] |
Approved w/Constraints
[4, 14, 16, 17, 18] |
Approved w/Constraints
[4, 14, 17, 18, 19] |
Approved w/Constraints
[14, 17, 18, 19, 20, 21] |
Approved w/Constraints
[14, 17, 18, 19, 20, 21] |
Approved w/Constraints
[14, 17, 18, 19, 20, 21] |
| | | | [1] | Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISO (Information Security Officer) to ensure compliance with VA Handbook 6500. | | | [2] | As of April 23, 2015, per the Deputy CIO of Architecture, Strategy and Design (ASD), all technologies in use by the VA require an assessment by the VA Section 508 office. Section 508 of the Rehabilitation Act Amendments of 1998 is a federal law that sets the guidelines for technology accessibility. A VA Section 508 assessment of this technology has not been completed at the time of publication. Therefore, as of April 23, 2015 only users of this technology who have deployed the technology to the production environment, or have project design and implementation plans approved, may continue to operate this technology. In the case of a project that has implemented, or been approved for a specific site or number of users, and that project needs to expand operations to other sites or to an increased user base, it may do so as long as the project stays on the existing version of the technology that was approved or implemented as of April 22, 2015. Use of this technology in all other cases is prohibited.
| | | [3] | Per the May 5th, 2015 memorandum from the VA Chief Information Security Officer (CISO) FIPS 140-2 Validate Full Disk Encryption (FOE) for Data at Rest in Database Management Systems (DBMS) and in accordance with Federal requirements and VA policy, database management must use Federal Information Processing Standards (FIPS) 140-2 compliant encryption to protect the confidentiality and integrity of VA information at rest at the application level. If FIPS 140-2 encryption at the application level is not technically possible, FIPS 140-2 compliant full disk encryption (FOE) must be implemented on the hard drive where the DBMS resides. Appropriate access enforcement and physical security control must also be implemented. All instances of deployment using this technology should be reviewed to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards. It is the responsibility of the system owner to work with the local CIO (or designee) and Information Security Officer (ISO) to ensure that a compliant DBMS technology is selected and that if needed, mitigating controls are in place and documented in a System Security Plan (SSP). | | | [4] | This product is Class 2 or Class 3 VA-designed and built Local Software OR is a commercially-licensed software product purchased or leased that will run in a VA VISTA environment or integrate with Class 1 National VISTA Software. Presence of this software on the One-VA TRM does not equate to designation as a Class 1 National Software product and MUST NOT be assumed to comply with all VA programming standards, namespacing and interface control agreement standards, data management standards, documentation standards, information assurance standards, security standards and 508 compliance standards. As a Class 2 or Class 3 product, it MUST NOT be assumed to having been released into production through all OI&T product release and sustainment process controls for project management; requirements, development and testing management; and configuration, change, and release management necessary to satisfy OI&T process and product compliance. The OI&T Enterprise Program Management Office does not endorse nor support Class 2 and Class 3 products and does not support data usage or application programmer interfaces (APIs) between Class 1 National Software products and Class 2 or Class 3 products. Class 2 or Class 3 products must restrict their interfaces to Class 1 National Software to use of publicly-supported APIs ONLY. VA Directive 6402, Modifications to Standardized National Software, dictates the policy for Class 2 and Class 3 products and modifications to Class 1 National Software products. Local enhancements to, or modifications of, Class 1 Protected National Software (as listed in the Directive), in part or in whole, is PROHIBITED. Local enhancements to, or modifications of, Non-Protected Class 1 National Software is allowed ONLY with an approved waiver by the Software Modification Waiver Committee (SMWC). Class 2 and Class 3 software that does not modify the Class 1 National Software in any way must still adhere to namespacing and interface control agreement standards as well as National Field Operations Processes. | | | [5] | This technology should only be used when required by a Veterans Affairs (VA) business partner for an approved VA Project. Use of this technology must comply with ESCCB requirements which include: Signed Interconnection Agreements/Memorandum of Understanding agreements (MOU/ISA) with each external business partner, compliance with VA Handbook 6500, and must implement appropriate National Institute of Standards and Technology (NIST) Federal Information Processing Standards (FIPS) requirements for all devices interacting with this technology. All instances of deployment using this technology should be reviewed by the local ISO (Information Security Officer) to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards and an ISO Risk Based Decision (RBD) must be approved by the local ISO/CIO before it can be used in the VA Production Environment. In cases where the technology is used for external connections, a full Enterprise Security Change Control Board (ESCCB) review is required in accordance VA Directive 6004, VA Directive 6517
and VA Directive 6513. The local ISO can advise on the ESCCB review process and ensure privacy of information compliance protections are in place. | | | [6] | Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISO (Information Security Officer) to ensure compliance with VA Handbook 6500. | | | [7] | This technology should only be used when required by a Veterans Affairs (VA) business partner for an approved VA Project. Use of this technology must comply with ESCCB requirements which include: Signed Interconnection Agreements/Memorandum of Understanding agreements (MOU/ISA) with each external business partner, compliance with VA Handbook 6500, and must implement appropriate National Institute of Standards and Technology (NIST) Federal Information Processing Standards (FIPS) requirements for all devices interacting with this technology. All instances of deployment using this technology should be reviewed by the local ISO (Information Security Officer) to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards. As of January 27th, 2017, Risk-based Decisions (RBD) will be handled per VAIQ # 7769667. In cases where the technology is used for external connections, a full Enterprise Security Change Control Board (ESCCB) review is required in accordance VA Directive 6004, VA Directive 6517
and VA Directive 6513. The local ISO can advise on the ESCCB review process and ensure privacy of information compliance protections are in place. | | | [8] | Per the May 5th, 2015 memorandum from the VA Chief Information Security Officer (CISO) FIPS 140-2 Validate Full Disk Encryption (FOE) for Data at Rest in Database Management Systems (DBMS) and in accordance with Federal requirements and VA policy, database management must use Federal Information Processing Standards (FIPS) 140-2 compliant encryption to protect the confidentiality and integrity of VA information at rest at the application level. If FIPS 140-2 encryption at the application level is not technically possible, FIPS 140-2 compliant full disk encryption (FOE) must be implemented on the hard drive where the DBMS resides. Appropriate access enforcement and physical security control must also be implemented. All instances of deployment using this technology should be reviewed to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards. It is the responsibility of the system owner to work with the local CIO (or designee) and Information Security Officer (ISO) to ensure that a compliant DBMS technology is selected and that if needed, mitigating controls are in place and documented in a System Security Plan (SSP). | | | [9] | This technology should only be used when required by a Veterans Affairs (VA) business partner for an approved VA Project. Use of this technology must comply with ESCCB requirements which include: Signed Interconnection Agreements/Memorandum of Understanding agreements (MOU/ISA) with each external business partner, compliance with VA Handbook 6500, and must implement appropriate National Institute of Standards and Technology (NIST) Federal Information Processing Standards (FIPS) requirements for all devices interacting with this technology. All instances of deployment using this technology should be reviewed by the local ISO (Information Security Officer) to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards. As of January 27th, 2017, Risk-based Decisions (RBD) will be handled per VAIQ # 7769667. In cases where the technology is used for external connections, a full Enterprise Security Change Control Board (ESCCB) review is required in accordance VA Directive 6004, VA Directive 6517
and VA Directive 6513. The local ISO can advise on the ESCCB review process and ensure privacy of information compliance protections are in place. | | | [10] | In cases where the technology is used for external connections, a full Enterprise Security Change Control Board (ESCCB) review is required in accordance VA Directive 6004 , VA Directive 6517, and VA Directive 6513. The local ISO can advise on the ESCCB review process. | | | [11] | Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISO (Information Security Officer) to ensure compliance with VA Handbook 6500. | | | [12] | Per the May 5th, 2015 memorandum from the VA Chief Information Security Officer (CISO) FIPS 140-2 Validate Full Disk Encryption (FOE) for Data at Rest in Database Management Systems (DBMS) and in accordance with Federal requirements and VA policy, database management must use Federal Information Processing Standards (FIPS) 140-2 compliant encryption to protect the confidentiality and integrity of VA information at rest at the application level. If FIPS 140-2 encryption at the application level is not technically possible, FIPS 140-2 compliant full disk encryption (FOE) must be implemented on the hard drive where the DBMS resides. Appropriate access enforcement and physical security control must also be implemented. All instances of deployment using this technology should be reviewed to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards. It is the responsibility of the system owner to work with the local CIO (or designee) and Information Security Officer (ISO) to ensure that a compliant DBMS technology is selected and that if needed, mitigating controls are in place and documented in a System Security Plan (SSP). | | | [13] | In cases where the technology is used for external connections, a full Enterprise Security Change Control Board (ESCCB) review is required in accordance VA Directive 6004 , VA Directive 6517, and VA Directive 6513. The local ISO can advise on the ESCCB review process. | | | [14] | Users must ensure that Oracle Database is implemented with VA-approved baselines. (refer to the ‘Category’ tab under ‘Runtime Dependencies’) | | | [15] | Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISSO (Information System Security Officer) to ensure compliance with VA Handbook 6500. | | | [16] | Per the May 5th, 2015 memorandum from the VA Chief Information Security Officer (CISO) FIPS 140-2 Validate Full Disk Encryption (FOE) for Data at Rest in Database Management Systems (DBMS) and in accordance with Federal requirements and VA policy, database management must use Federal Information Processing Standards (FIPS) 140-2 compliant encryption to protect the confidentiality and integrity of VA information at rest at the application level. If FIPS 140-2 encryption at the application level is not technically possible, FIPS 140-2 compliant full disk encryption (FOE) must be implemented on the hard drive where the DBMS resides. Appropriate access enforcement and physical security control must also be implemented. All instances of deployment using this technology should be reviewed to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards. It is the responsibility of the system owner to work with the local CIO (or designee) and Information System Security Officer (ISSO) to ensure that a compliant DBMS technology is selected and that if needed, mitigating controls are in place and documented in a System Security Plan (SSP). | | | [17] | In cases where the technology is used for external connections, a full Enterprise Security Change Control Board (ESCCB) review is required in accordance VA Directive 6004 , VA Directive 6517, and VA Directive 6513. The local ISSO (Information System Security Officer) can advise on the ESCCB review process. | | | [18] | Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISSO (Information System Security Officer) to ensure compliance with both VA Handbook 6500 and VA Directive 6500. | | | [19] | Per the May 5th, 2015 memorandum from the VA Chief Information Security Officer (CISO) FIPS 140-2 FIPS 140-2 Validate Full Disk Encryption (FOE) for Data at Rest in Database Management Systems (DBMS) and in accordance with Federal requirements and VA policy, database management must use Federal Information Processing Standards (FIPS) 140-2 or its successor to protect the confidentiality and integrity of VA information at rest at the application level. If FIPS 140-2 encryption at the application level is not technically possible, FIPS 140-2 or 140-3 compliant full disk encryption (FOE) must be implemented on the storage device where the DBMS resides. Appropriate access enforcement and physical security control must also be implemented. All instances of deployment using this technology should be reviewed to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards. It is the responsibility of the system owner to work with the local CIO (or designee) and Information System Security Officer (ISSO) to ensure that a compliant DBMS technology is selected and that if needed, mitigating controls are in place and documented in a System Security Plan (SSP). By September 22, 2026, all FIPS 140-2 certificate validations will be placed on the Historical List, please refer to FIPS Transition Effort for further guidance and timeline of changes. | | | [20] | This product is Class 2 or Class 3 VA-designed and built Local Software OR is a commercially-licensed software product purchased or leased that will run in a VA VISTA environment or integrate with Class 1 National VISTA Software. Presence of this software on the One-VA TRM does not equate to designation as a Class 1 National Software product and MUST NOT be assumed to comply with all VA programming standards, namespacing and interface control agreement standards, data management standards, documentation standards, information assurance standards, security standards and 508 compliance standards. As a Class 2 or Class 3 product, it MUST NOT be assumed to having been released into production through all OI&T product release and sustainment process controls for project management; requirements, development and testing management; and configuration, change, and release management necessary to satisfy OI&T process and product compliance. The OI&T Enterprise Program Management Office does not endorse nor support Class 2 and Class 3 products and does not support data usage or application programmer interfaces (APIs) between Class 1 National Software products and Class 2 or Class 3 products. Class 2 or Class 3 products must restrict their interfaces to Class 1 National Software to use of publicly-supported APIs ONLY. VA Directive 6402, Modifications to Standardized National Software, dictates the policy for Class 2 and Class 3 products and modifications to Class 1 National Software products. Local enhancements to, or modifications of, Class 1 Protected National Software (as listed in the Directive), in part or in whole, is PROHIBITED. Local enhancements to, or modifications of, Non-Protected Class 1 National Software is allowed ONLY with an approved waiver by the Software Modification Waiver Committee (SMWC). Class 2 and Class 3 software that does not modify the Class 1 National Software in any way must still adhere to namespacing and interface control agreement standards as well as National Field Operations Processes. | | | [21] | The Federal Information Processing standards (FIPS) 140-2 certification status of this technology was not able to be verified. This technology will require a 3rd party FIPS 140-2 or 140-3 certified solution for any data containing PHI/PII or VA sensitive information, where applicable. More information regarding the Cryptographic Module Validation Program (CMVP) can be found on the NIST website. |
|
