| Users must ensure their use of this technology/standard is consistent with VA policies and standards, including, but not limited to,
VA Handbooks 6102 and 6500; VA Directives 6004, 6513, and 6517; and National Institute of Standards and Technology (NIST) standards, including Federal Information
Processing Standards (FIPS). Users must ensure sensitive data is properly protected in compliance with all VA regulations. Prior to use of this technology, users
should check with their supervisor, Information Security Officer (ISO), Facility Chief Information Officer (CIO), or local Office of Information and Technology
(OI&T) representative to ensure that all actions are consistent with current VA policies and procedures prior to implementation. |
| The VA Decision Matrix displays the current and future VAIT
position regarding different releases of a TRM entry. These decisions are
based upon the best information available as of the most current date. The consumer of this information has the
responsibility to consult the organizations responsible for the desktop, testing, and/or production environments
to ensure that the target version of the technology will be supported.
|
|
|
| Legend: |
| White |
Authorized: The technology/standard has been authorized for use.
|
| Yellow |
Authorized w/ Constraints: The technology/standard can be used within the specified constraints located
below the decision matrix in the footnote[1] and on the General tab.
|
| Gray |
Authorized w/ Constraints (POA&M): This technology or standard can be used only if a POA&M review is conducted and signed by
the Authorizing Official Designated Representative (AODR) as designated by the Authorizing Official (AO) or designee
and based upon a recommendation from the POA&M Compliance Enforcement,
has been granted to the project team or organization that wishes to use the technology.
|
| Orange |
Authorized w/ Constraints (DIVEST): VA has decided to divest itself on the use of the technology/standard.
As a result, all projects currently utilizing the technology/standard must plan to eliminate their use of
the technology/standard. Additional information on when the entry is projected to become unauthorized may be
found on the Decision tab for the specific entry.
|
| Black |
Unauthorized: The technology/standard is not (currently) permitted to be used under any circumstances.
|
| Blue |
Authorized w/ Constraints (PLANNING/EVALUATION): The period of time this technology is currently being evaluated, reviewed,
and tested in controlled environments. Use of this technology is strictly controlled and not available
for use within the general population. If a customer would like to use this technology, please work with
your local or Regional OI&T office and contact the appropriate evaluation office
displayed in the notes below the decision matrix. The Local or Regional OI&T
office should submit an
inquiry to the TRM
if they require further assistance or if the evaluating office is not listed in the notes below.
|
|
| Release/Version Information: |
|
VA decisions for specific versions may include a ‘.x’ wildcard, which denotes a decision that pertains to a range of multiple versions.
|
|
For example, a technology authorized with a decision for 7.x would cover any version of 7.(Anything) - 7.(Anything). However, a 7.4.x decision
would cover any version of 7.4.(Anything), but would not cover any version of 7.5.x or 7.6.x on the TRM.
|
|
VA decisions for specific versions may include ‘+’ symbols; which denotes that the decision for the version specified also includes versions greater than
what is specified but is not to exceed or affect previous decimal places.
|
|
For example, a technology authorized with a decision for 12.6.4+ would cover any version that is greater than 12.6.4, but would not exceed the .6 decimal ie: 12.6.401
is ok, 12.6.5 is ok, 12.6.9 is ok, however 12.7.0 or 13.0 is not.
|
| Any major.minor version that is not listed in the VA Decision Matrix is considered Authorized w/ Constraints (POA&M). |
|
<Past |
Future> |
| 11.1.0.x |
DIVEST
[3, 5, 8, 9, 10] |
DIVEST
[3, 5, 8, 9, 10] |
DIVEST
[3, 5, 8, 9, 10] |
DIVEST
[3, 5, 8, 10, 11] |
DIVEST
[3, 5, 8, 11, 12] |
DIVEST
[3, 5, 8, 11, 12] |
Unapproved |
Authorized w/ Constraints (POA&M) |
Authorized w/ Constraints (POA&M) |
Authorized w/ Constraints (POA&M) |
Authorized w/ Constraints (POA&M) |
Authorized w/ Constraints (POA&M) |
| 23.x |
Approved w/Constraints
[3, 5, 8, 9, 10] |
Approved w/Constraints
[3, 5, 8, 9, 10] |
Approved w/Constraints
[3, 5, 8, 9, 10] |
Approved w/Constraints
[3, 5, 8, 10, 11] |
Approved w/Constraints
[3, 5, 8, 11, 12] |
Approved w/Constraints
[3, 5, 8, 11, 12] |
Approved w/Constraints
[3, 5, 8, 11, 12] |
Authorized w/ Constraints (DIVEST)
[3, 5, 11, 12, 13, 14, 15] |
Authorized w/ Constraints (DIVEST)
[3, 5, 11, 12, 13, 14, 15] |
Authorized w/ Constraints (DIVEST)
[3, 5, 11, 12, 13, 14, 15] |
Authorized w/ Constraints (DIVEST)
[3, 5, 11, 12, 13, 14, 15] |
Authorized w/ Constraints (DIVEST)
[3, 5, 11, 12, 13, 14, 15] |
| 24.x |
Unapproved |
Unapproved |
Unapproved |
Unapproved |
Unapproved |
Unapproved |
Unapproved |
Authorized w/ Constraints
[3, 5, 11, 12, 13, 14, 15] |
Authorized w/ Constraints
[3, 5, 11, 12, 13, 14, 15] |
Authorized w/ Constraints
[3, 5, 11, 12, 13, 14, 15] |
Authorized w/ Constraints
[3, 5, 11, 12, 13, 14, 15] |
Authorized w/ Constraints
[3, 5, 11, 12, 13, 14, 15] |
| | | | [1] | Users must ensure that Microsoft Internet Explorer and Google Chrome are implemented with VA-authorized baselines. (Refer to the ‘Category’ tab under ‘Companion Technologies/Supported Standards’). | | | [2] | Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISO (Information Security Officer) to ensure compliance with VA Handbook 6500. | | | [3] | Technology must remain patched and operated in accordance with Federal and Department security policies and guidelines in order to mitigate known and future security vulnerabilities. | | | [4] | Per the May 5th, 2015 memorandum from the VA Chief Information Security Officer (CISO) FIPS 140-2 Validate Full Disk Encryption (FOE) for Data at Rest in Database Management Systems (DBMS) and in accordance with Federal requirements and VA policy, database management must use Federal Information Processing Standards (FIPS) 140-2 compliant encryption to protect the confidentiality and integrity of VA information at rest at the application level. If FIPS 140-2 encryption at the application level is not technically possible, FIPS 140-2 compliant full disk encryption (FOE) must be implemented on the hard drive where the DBMS resides. Appropriate access enforcement and physical security control must also be implemented. All instances of deployment using this technology should be reviewed to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards. It is the responsibility of the system owner to work with the local CIO (or designee) and Information Security Officer (ISO) to ensure that a compliant DBMS technology is selected and that if needed, mitigating controls are in place and documented in a System Security Plan (SSP). | | | [5] | Use of this technology is limited to VA staff charged with ensuring the security of the VA network infrastructure. VA staff performing analysis with this technology need to work closely with system owners and agree on security scanning rules, such as the assets scanned, along the schedule and frequency of those scans. | | | [6] | Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISO (Information Security Officer) to ensure compliance with VA Handbook 6500. | | | [7] | Per the May 5th, 2015 memorandum from the VA Chief Information Security Officer (CISO) FIPS 140-2 Validate Full Disk Encryption (FOE) for Data at Rest in Database Management Systems (DBMS) and in accordance with Federal requirements and VA policy, database management must use Federal Information Processing Standards (FIPS) 140-2 compliant encryption to protect the confidentiality and integrity of VA information at rest at the application level. If FIPS 140-2 encryption at the application level is not technically possible, FIPS 140-2 compliant full disk encryption (FOE) must be implemented on the hard drive where the DBMS resides. Appropriate access enforcement and physical security control must also be implemented. All instances of deployment using this technology should be reviewed to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards. It is the responsibility of the system owner to work with the local CIO (or designee) and Information Security Officer (ISO) to ensure that a compliant DBMS technology is selected and that if needed, mitigating controls are in place and documented in a System Security Plan (SSP). | | | [8] | Users must utilize authorized internet browsers, as Microsoft Internet Explorer has reached End of Life status. See Category Tab for details.
Users must ensure that Microsoft Structured Query Language (SQL) Server and Oracle Database technologies are implemented with VA-authorized baselines. (Refer to the ‘Category’ tab under ‘Runtime Dependencies’)
Users must not utilize the Secure Sockets Layer (SSL) protocol, as it is unapproved for use on the TRM.
| | | [9] | Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISSO (Information System Security Officer) to ensure compliance with VA Handbook 6500. | | | [10] | Per the May 5th, 2015 memorandum from the VA Chief Information Security Officer (CISO) FIPS 140-2 Validate Full Disk Encryption (FOE) for Data at Rest in Database Management Systems (DBMS) and in accordance with Federal requirements and VA policy, database management must use Federal Information Processing Standards (FIPS) 140-2 compliant encryption to protect the confidentiality and integrity of VA information at rest at the application level. If FIPS 140-2 encryption at the application level is not technically possible, FIPS 140-2 compliant full disk encryption (FOE) must be implemented on the hard drive where the DBMS resides. Appropriate access enforcement and physical security control must also be implemented. All instances of deployment using this technology should be reviewed to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards. It is the responsibility of the system owner to work with the local CIO (or designee) and Information System Security Officer (ISSO) to ensure that a compliant DBMS technology is selected and that if needed, mitigating controls are in place and documented in a System Security Plan (SSP). | | | [11] | Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISSO (Information System Security Officer) to ensure compliance with both VA Handbook 6500 and VA Directive 6500. | | | [12] | Per the May 5th, 2015 memorandum from the VA Chief Information Security Officer (CISO) FIPS 140-2 FIPS 140-2 Validate Full Disk Encryption (FOE) for Data at Rest in Database Management Systems (DBMS) and in accordance with Federal requirements and VA policy, database management must use Federal Information Processing Standards (FIPS) 140-2 or its successor to protect the confidentiality and integrity of VA information at rest at the application level. If FIPS 140-2 encryption at the application level is not technically possible, FIPS 140-2 or 140-3 compliant full disk encryption (FOE) must be implemented on the storage device where the DBMS resides. Appropriate access enforcement and physical security control must also be implemented. All instances of deployment using this technology should be reviewed to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards. It is the responsibility of the system owner to work with the local CIO (or designee) and Information System Security Officer (ISSO) to ensure that a compliant DBMS technology is selected and that if needed, mitigating controls are in place and documented in a System Security Plan (SSP). By September 22, 2026, all FIPS 140-2 certificate validations will be placed on the Historical List, please refer to FIPS Transition Effort for further guidance and timeline of changes. | | | [13] | Users must ensure that Google Chrome, Microsoft Internet Information Services (IIS), Db2, PowerShell, Microsoft Structured Query Language (SQL) Server, and Oracle Database technologies are implemented with VA-authorized baselines. (Refer to the ‘Category’ tab under ‘Runtime Dependencies’)
Users must not utilize the Secure Sockets Layer (SSL) protocol, as it requires a POA&M. | | | [14] | Users should check with their supervisor, Information System Security Officer (ISSO) or local OIT representative for permission to download and use this software. Downloaded software must always be scanned for viruses prior to installation to prevent adware or malware. Freeware may only be downloaded directly from the primary site that the creator of the software has advertised for public download and user or development community engagement. Users should note, any attempt by the installation process to install any additional, unrelated software is not authorized and the user should take the proper steps to decline those installations. | | | [15] | The Federal Information Processing standards (FIPS) 140-2 certification status of this technology was not able to be verified. This technology will require a 3rd party FIPS 140-2 or 140-3 certified solution for any data containing PHI/PII or VA sensitive information, where applicable. More information regarding the Cryptographic Module Validation Program (CMVP) can be found on the NIST website. |
|
| Note: |
At the time of writing, version 24.5 is the most current version, released 05/08/2024. |
