OrthoModel Pro

General Information

Technologies must be operated and maintained in accordance with Federal and Department security and privacy policies and guidelines. More information on the proper use of the TRM can be found on the TRM Proper Use Tab/Section.

Website:	Go to site
Description:	OrthoModel Pro is Computer Aided Design / Computer Aided Manufacturing (CAD / CAM) software installed on a desktop and is used for capturing 3D images of a patient`s foot shape, designing the orthotic shape, and creating the carving paths for orthotic insoles. This software is utilized with the iQube foot scanner which is connected to a desktop via ethernet cable and/or Universal Serial Bus (USB) port. Please note that a dedicated website for this product does not appear to exist. This technology stores data locally in Extensible Markup Language (XML) file format.
Technology/Standard Usage Requirements:	Users must ensure their use of this technology/standard is consistent with VA policies and standards, including, but not limited to, VA Handbooks 6102 and 6500; VA Directives 6004, 6513, and 6517; and National Institute of Standards and Technology (NIST) standards, including Federal Information Processing Standards (FIPS). Users must ensure sensitive data is properly protected in compliance with all VA regulations. Prior to use of this technology, users should check with their supervisor, Information Security Officer (ISO), Facility Chief Information Officer (CIO), or local Office of Information and Technology (OI&T) representative to ensure that all actions are consistent with current VA policies and procedures prior to implementation.
Section 508 Information:	This technology has not been assessed by the Section 508 Office. The Implementer of this technology has the responsibility to ensure the version deployed is 508-compliant. Section 508 compliance may be reviewed by the Section 508 Office and appropriate remedial action required if necessary. For additional information or assistance regarding Section 508, please contact the Section 508 Office at Section508@va.gov.
Decision:	View Decisions

Decision Source:	TRM Mgmt Group
Decision Process:	One-VA TRM v21.7
Decision Date:	07/15/2021 at 20:01:21 UTC
Aliases:	OrthoMODEL Pro 2016 SP4
Introduced By:	TRM Request
Vendor Name:	Autodesk, Inc.

Vendor Release Information

The Vendor Release table provides the known releases for the TRM Technology, obtained from the vendor (or from the release source).

Version	Release Date	Vendor End of Life Date	Vendor Desupport Date
2015.x	10/21/2014
2016.x	09/11/2015

Current Decision Matrix (07/09/2021)

Users must ensure their use of this technology/standard is consistent with VA policies and standards, including, but not limited to, VA Handbooks 6102 and 6500; VA Directives 6004, 6513, and 6517; and National Institute of Standards and Technology (NIST) standards, including Federal Information Processing Standards (FIPS). Users must ensure sensitive data is properly protected in compliance with all VA regulations. Prior to use of this technology, users should check with their supervisor, Information Security Officer (ISO), Facility Chief Information Officer (CIO), or local Office of Information and Technology (OI&T) representative to ensure that all actions are consistent with current VA policies and procedures prior to implementation.

The VA Decision Matrix displays the current and future VA IT position regarding different releases of a TRM entry. These decisions are based upon the best information available as of the most current date. The consumer of this information has the responsibility to consult the organizations responsible for the desktop, testing, and/or production environments to ensure that the target version of the technology will be supported. Any major.minor version that is not listed in the VA Decision Matrix is considered unapproved for use.

Legend:

White	Approved: The technology/standard has been approved for use.
Yellow	Approved w/Constraints: The technology/standard can be used within the specified constraints located below the decision matrix in the footnote[1] and on the General tab.
Gray	Unapproved: This technology or standard can be used only if a POA&M review is conducted and signed by the Authorizing Official Designated Representative (AODR) as designated by the Authorizing Official (AO) or designee and based upon a recommendation from the POA&M Compliance Enforcement, has been granted to the project team or organization that wishes to use the technology.
Orange	Divest: VA has decided to divest itself on the use of the technology/standard. As a result, all projects currently utilizing the technology/standard must plan to eliminate their use of the technology/standard. Additional information on when the entry is projected to become unapproved may be found on the Decision tab for the specific entry.
Black	Prohibited: The technology/standard is not (currently) permitted to be used under any circumstances.
Blue	Planning/Evaluation Constraint:The period of time this technology is currently being evaluated, reviewed, and tested in controlled environments. Use of this technology is strictly controlled and not available for use within the general population. If a customer would like to use this technology, please work with your local or Regional OI&T office and contact the appropriate evaluation office displayed in the notes below the decision matrix. The Local or Regional OI&T office should submit an inquiry to the TRM if they require further assistance or if the evaluating office is not listed in the notes below.

Release/Version Information:

VA decisions for specific versions may include a ‘.x’ wildcard, which denotes a decision that pertains to a range of multiple versions.

For example, a technology approved with a decision for 7.x would cover any version of 7.(Anything) - 7.(Anything). However, a 7.4.x decision would cover any version of 7.4.(Anything), but would not cover any version of 7.5.x or 7.6.x on the TRM.

VA decisions for specific versions may include ‘+’ symbols; which denotes that the decision for the version specified also includes versions greater than what is specified but is not to exceed or affect previous decimal places.

For example, a technology approved with a decision for 12.6.4+ would cover any version that is greater than 12.6.4, but would not exceed the .6 decimal ie: 12.6.401 is ok, 12.6.5 is ok, 12.6.9 is ok, however 12.7.0 or 13.0 is not.

<Past

CY2024

CY2025

CY2026

Future>

Release

Q1

Q2

Q3

Q4

Q1

Q2

Q3

Q4

Q1

Q2

Q3

Q4

2015.x

Unapproved

2016.x

Unapproved

Decision Constraints


[1]	Technology must remain patched and operated in accordance with Federal and Department security policies and guidelines in order to mitigate known and future security vulnerabilities.

[2]	Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISO (Information Security Officer) to ensure compliance with VA Handbook 6500.

[3]	Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISO (Information Security Officer) to ensure compliance with VA Handbook 6500.

Note:

At the time of writing, version 2016 SP4 is the most current version.

References

The following reference(s) are associated with this entry:
Type	Name	Source	Description
There are no references identified for this entry.

Technology Components

Note: This list may not be complete. No component, listed or unlisted, may be used outside of the technology in which it is released. The usage decision for a component is found in the Decision and Decision Constraints.
Name	Description
OrthoMill	OrthoMill is a 3D Computer Aided Manufacturing (CAM) engineering solution for the manufacture of custom Orthotic insoles. This component contains tools for selecting and filling blocks of material with queue designs from OrthoModel or other CAD systems. OrthoMill is highly automated, which may make it easy for laboratories to learn and use.
OrthoModel	OrthoModel is a 3D orthotic Computer Aided Design (CAD) utility used in conjunction with the iQube Scanner. This component is used to scan a foot, cast, or impression.

VA Categories View the VA Categorization Framework

Domain Area	Category	Customer Guidance	Category Locked By ELT Date
Health Care Administrative	Health Delivery Support
Health Care Health Services	Specialty Services

Operating Systems Supported by the Technology

Windows Client - Approved w/Constraints

Technologies/Standards Relationships

Runtime Dependencies:

No runtime dependencies have been identified.

Comparable Technologies:

Companion Technologies/Supported Standards:

General Analysis

Adoption Benefits

This technology is mature.
This technology may provide efficiencies in providing insoles for those patients with orthotic issues.
At the time of writing, no National Institute of Standards and Technology (NIST) vulnerabilities had been reported and no VA Network Security Operations Center (NSOC) bulletins had been issued for the latest versions of this technology.
The vendor provides technical support via email, phone, and an online forum.

Adoption Risks

Due to the rapid release schedule of this technology, the VA may be unable to update to the most recent patch and may require a deployment model requiring the use of specific versions.
System scans indicate that this technology is no longer in use within the VA network.
The potential exists to store Personally Identifiable Information (PII), Protected Health Information (PHI) and/or VA Sensitive data and proper security standards must be followed in these cases.

Architectural Risks

This technology is not portable as it runs only on Windows platforms.

Inside VA

Budget and Performance

Inside the Media Room

National Observances

Special Events

VA Technical Reference Model v 24.7

General Information

Vendor Release Information

Current Decision Matrix (07/09/2021)

Decision Constraints

References

Technology Components

VA Categories View the VA Categorization Framework

Operating Systems Supported by the Technology

Technologies/Standards Relationships

Runtime Dependencies:

Comparable Technologies:

Companion Technologies/Supported Standards:

General Analysis

Adoption Benefits

Adoption Risks

Architectural Risks

CONNECT

VA HOME

QUICK LIST

RESOURCES

ADMINISTRATION

VA Technical Reference Model v 24.7

General Information

Vendor Release Information

Current Decision Matrix (07/09/2021)

Decision Constraints

References

Technology Components

VA Categories View the VA Categorization Framework

Operating Systems Supported by the Technology

Technologies/Standards Relationships

Runtime Dependencies:

Comparable Technologies:

Companion Technologies/Supported Standards:

General Analysis

Adoption Benefits

Adoption Risks

Architectural Risks

EMAIL UPDATES