HP SmartStream 3D Build Manager

General Information

Technologies must be operated and maintained in accordance with Federal and Department security and privacy policies and guidelines. More information on the proper use of the TRM can be found on the TRM Proper Use Tab/Section.

Website:	Go to site
Description:	Hewlett Packard (HP) SmartStream 3D Build Manager is a software tool that allows 3D printed virtual models to be submitted to HP-branded 3D printers to produce physical 3D models. It allows users to add and remove parts, reposition them, change certain settings for the print, and translates virtual model information into information the machine uses to print.
Technology/Standard Usage Requirements:	Users must ensure their use of this technology/standard is consistent with VA policies and standards, including, but not limited to, VA Handbooks 6102 and 6500; VA Directives 6004, 6513, and 6517; and National Institute of Standards and Technology (NIST) standards, including Federal Information Processing Standards (FIPS). Users must ensure sensitive data is properly protected in compliance with all VA regulations. Prior to use of this technology, users should check with their supervisor, Information Security Officer (ISO), Facility Chief Information Officer (CIO), or local Office of Information and Technology (OI&T) representative to ensure that all actions are consistent with current VA policies and procedures prior to implementation.
Section 508 Information:	This technology has not been assessed by the Section 508 Office. The Implementer of this technology has the responsibility to ensure the version deployed is 508-compliant. Section 508 compliance may be reviewed by the Section 508 Office and appropriate remedial action required if necessary. For additional information or assistance regarding Section 508, please contact the Section 508 Office at Section508@va.gov.
Decision:	View Decisions

Decision Source:	TRM Mgmt Group
Decision Process:	One-VA TRM v23.12
Decision Date:	12/12/2023 at 12:58:55 UTC
Introduced By:	TRM Request
Vendor Name:	HP

Vendor Release Information

The Vendor Release table provides the known releases for the TRM Technology, obtained from the vendor (or from the release source).

Version	Release Date	Vendor End of Life Date	Vendor Desupport Date
2.0	01/30/2019

Current Decision Matrix (12/05/2023)

Users must ensure their use of this technology/standard is consistent with VA policies and standards, including, but not limited to, VA Handbooks 6102 and 6500; VA Directives 6004, 6513, and 6517; and National Institute of Standards and Technology (NIST) standards, including Federal Information Processing Standards (FIPS). Users must ensure sensitive data is properly protected in compliance with all VA regulations. Prior to use of this technology, users should check with their supervisor, Information Security Officer (ISO), Facility Chief Information Officer (CIO), or local Office of Information and Technology (OI&T) representative to ensure that all actions are consistent with current VA policies and procedures prior to implementation.

The VA Decision Matrix displays the current and future VA IT position regarding different releases of a TRM entry. These decisions are based upon the best information available as of the most current date. The consumer of this information has the responsibility to consult the organizations responsible for the desktop, testing, and/or production environments to ensure that the target version of the technology will be supported. Any major.minor version that is not listed in the VA Decision Matrix is considered unapproved for use.

Legend:

White	Approved: The technology/standard has been approved for use.
Yellow	Approved w/Constraints: The technology/standard can be used within the specified constraints located below the decision matrix in the footnote[1] and on the General tab.
Gray	Unapproved: This technology or standard can be used only if a POA&M review is conducted and signed by the Authorizing Official Designated Representative (AODR) as designated by the Authorizing Official (AO) or designee and based upon a recommendation from the POA&M Compliance Enforcement, has been granted to the project team or organization that wishes to use the technology.
Orange	Divest: VA has decided to divest itself on the use of the technology/standard. As a result, all projects currently utilizing the technology/standard must plan to eliminate their use of the technology/standard. Additional information on when the entry is projected to become unapproved may be found on the Decision tab for the specific entry.
Black	Prohibited: The technology/standard is not (currently) permitted to be used under any circumstances.
Blue	Planning/Evaluation Constraint:The period of time this technology is currently being evaluated, reviewed, and tested in controlled environments. Use of this technology is strictly controlled and not available for use within the general population. If a customer would like to use this technology, please work with your local or Regional OI&T office and contact the appropriate evaluation office displayed in the notes below the decision matrix. The Local or Regional OI&T office should submit an inquiry to the TRM if they require further assistance or if the evaluating office is not listed in the notes below.

Release/Version Information:

VA decisions for specific versions may include a ‘.x’ wildcard, which denotes a decision that pertains to a range of multiple versions.

For example, a technology approved with a decision for 7.x would cover any version of 7.(Anything) - 7.(Anything). However, a 7.4.x decision would cover any version of 7.4.(Anything), but would not cover any version of 7.5.x or 7.6.x on the TRM.

VA decisions for specific versions may include ‘+’ symbols; which denotes that the decision for the version specified also includes versions greater than what is specified but is not to exceed or affect previous decimal places.

For example, a technology approved with a decision for 12.6.4+ would cover any version that is greater than 12.6.4, but would not exceed the .6 decimal ie: 12.6.401 is ok, 12.6.5 is ok, 12.6.9 is ok, however 12.7.0 or 13.0 is not.

<Past

CY2037

CY2038

CY2039

Future>

Release

Q1

Q2

Q3

Q4

Q1

Q2

Q3

Q4

Q1

Q2

Q3

Q4

2.0

Approved w/Constraints
[1, 5, 6, 7]

Decision Constraints


[1]	This technology requires using a Universal Service Bus (USB) technology to transfer data into the records. As such, proper precautions need to be taken to protect data. Users must refer to the 3D Printer Guidance section on the referenced Baseline Configuration document, which reads: 3D Printer Guidance At the time of this writing the Office of Information Security (OIS) is requiring all 3D printing technologies used within VHA to have a NISTIR 8023 Risk Assessment completed and approved by Cybersecurity Technology and Metrics (CTM). Please check the Printer and Multifunction Devices Page on the BCM Portal for vendor / model specific 3D printer Implementation Guides currently approved under Supporting Documents section. If you wish to add a printer not listed, please create a Service Now Request to start a security review and create a 3D printer Implementation Standard. These devices normally should not require an external vendor connection to support its operation however if it does, it will also require an approved Memorandum of Understanding/Interconnection Security Agreement (MOU/ISA) agreement. Healthcare Technologies Management (HTM) has agreed to support these devices once approved.

[2]	Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISO (Information Security Officer) to ensure compliance with VA Handbook 6500.

[3]	Users should check with their supervisor, Information Security Office (ISO) or local OIT representative for permission to download and use this software. Downloaded software must always be scanned for viruses prior to installation to prevent adware or malware. Freeware may only be downloaded directly from the primary site that the creator of the software has advertised for public download and user or development community engagement. Users should note, any attempt by the installation process to install any additional, unrelated software is not approved and the user should take the proper steps to decline those installations.

[4]	Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISSO (Information System Security Officer) to ensure compliance with VA Handbook 6500.

[5]	Users should check with their supervisor, Information System Security Officer (ISSO) or local OIT representative for permission to download and use this software. Downloaded software must always be scanned for viruses prior to installation to prevent adware or malware. Freeware may only be downloaded directly from the primary site that the creator of the software has advertised for public download and user or development community engagement. Users should note, any attempt by the installation process to install any additional, unrelated software is not approved and the user should take the proper steps to decline those installations.

[6]	Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISSO (Information System Security Officer) to ensure compliance with both VA Handbook 6500 and VA Directive 6500.

[7]	The Federal Information Processing standards (FIPS) 140-2 certification status of this technology was not able to be verified. This technology will require a 3rd party FIPS 140-2 or 140-3 certified solution for any data containing PHI/PII or VA sensitive information, where applicable. More information regarding the Cryptographic Module Validation Program (CMVP) can be found on the NIST website.

References

The following reference(s) are associated with this entry:
Type	Name	Source	Description

Technology Components

Note: This list may not be complete. No component, listed or unlisted, may be used outside of the technology in which it is released. The usage decision for a component is found in the Decision and Decision Constraints.
Name	Description
No components have been identified for this entry.

VA Categories View the VA Categorization Framework

Domain Area	Category	Customer Guidance	Category Locked By ELT Date
Collaboration and Electronic Workplace Productivity Software	Graphics Design Software

Operating Systems Supported by the Technology

Windows Client - Approved w/Constraints

Technologies/Standards Relationships

Runtime Dependencies:

Materialise Magics

Comparable Technologies:

GrabCAD Print

Companion Technologies/Supported Standards:

No companion technologies/standards have been identified.

General Analysis

Adoption Benefits

This is a well-documented technology.
This technology may improve productivity for specific staff whose responsibilities include utilize 3D printers and scanners to reproduce equipment.
At the time of writing, no National Institute of Standards and Technology (NIST) vulnerabilities had been reported and no VA Cyber Security Operations Center (CSOC) bulletins had been issued for the latest versions of this technology.
The vendor of this technology is an industry leader in printing technologies.
There is no licensing fee associated with this technology.
This technology provides proprietary functionality for vendor`s associated hardware.

Adoption Risks

There is no indication based on available vendor documentation that this technology is Federal Information Processing Standard (FIPS) 140-2 compliant.
The potential of vendor lock exists when utilizing proprietary vendor technology.
This technology involves the use Universal Serial Bus (USB) connections and proper security precautions must be taken when used.
The potential exists to store Personally Identifiable Information (PII), Protected Health Information (PHI) and/or VA Sensitive data and proper security standards must be followed in these cases.

Architectural Risks

This technology is not portable as it runs only on Windows platforms.

Inside VA

Budget and Performance

Inside the Media Room

National Observances

Special Events

VA Technical Reference Model v 24.7

General Information

Vendor Release Information

Current Decision Matrix (12/05/2023)

Decision Constraints

References

Technology Components

VA Categories View the VA Categorization Framework

Operating Systems Supported by the Technology

Technologies/Standards Relationships

Runtime Dependencies:

Comparable Technologies:

Companion Technologies/Supported Standards:

General Analysis

Adoption Benefits

Adoption Risks

Architectural Risks

CONNECT

VA HOME

QUICK LIST

RESOURCES

ADMINISTRATION

VA Technical Reference Model v 24.7

General Information

Vendor Release Information

Current Decision Matrix (12/05/2023)

Decision Constraints

References

Technology Components

VA Categories View the VA Categorization Framework

Operating Systems Supported by the Technology

Technologies/Standards Relationships

Runtime Dependencies:

Comparable Technologies:

Companion Technologies/Supported Standards:

General Analysis

Adoption Benefits

Adoption Risks

Architectural Risks

EMAIL UPDATES